Irrigation & retic
Solenoid valves & retic valves
Solenoids are the most-replaced part in Perth reticulation, and the part most often mis-diagnosed. We stock the common residential valves and coils, plus the valve boxes, fittings and waterproof connectors to do the job properly once.
If a station won't fire, it's usually the coil, the diaphragm, or the wiring — in that order. Bring the old valve in and we'll match it exactly, or set you up with a straight-swap alternative.
What we stock
- 24 VAC solenoid valves in standard sizes
- Replacement coils and diaphragms
- Valve boxes and lids
- Manifold fittings and isolation valves
- Waterproof wire connectors and multi-core cable
FAQs
Valves & Solenoids — questions
- How do I know which solenoid valve my system uses?
- Lift the valve-box lid and check the body for a brand and model — most Perth systems run one of a handful of standard 25 mm residential valves. Bring the old valve or a clear photo and we'll match it.
- Can I replace just the solenoid coil instead of the whole valve?
- Yes, if the coil is the fault — it unscrews in seconds and costs far less than a valve. If the valve weeps or won't shut, the diaphragm or valve body is the problem and a full swap is the honest fix.
- Why does one station run while the others don't?
- One dead station usually means that valve's coil or its wire joint has failed. All stations dead points to the controller, the master valve or the common wire — test before you buy parts.
Plan it now, collect it from opening day
We open in October 2026. Browse the range, work out quantities with our calculators, and get your parts list ready — the counter team will have it picked in minutes.